The retention phase stops being a source of anxiety.
It becomes a confident clinical act.
Retention has long been waiting for a robust, lasting, and clinically validated solution.
A solution accessible for all patients, complex cases, deep bites, periodontal cases, but above all everyday cases. For fewer after-care issues, greater peace of mind and smiles preserved for the long term.
Our platform standardises every step to give orthodontists the best possible conditions for clinical success.
Retention is a complex clinical act
A retainer cannot be adjusted after placement. For the patient, treatment is over. There are follow-up appointments, but there is no iteration, no correction, it is too late. The retainer must therefore be right first time. This requirement runs up against three simultaneous constraints, all complex, with no simple solution.
Physiological constraints
Each completed treatment results in a unique clinical outcome linked to the tooth movements achieved and the physiological stability obtained (osseous anchorage, periodontal reorganisation, ligament relaxation).
Furthermore, respecting the patient's dental anatomy is essential to limit the risks of debonding de la contention, de , lingual interferences et d’occlusal interferences.
The retainer must therefore be precise and fully custom-made.
Mechanical constraints
Each retainer wire is made from high-resilience materials with precisely defined mechanical properties (elastic modulus, elastic limit, plastic deformation capacity).
Furthermore, respecting mechanical constraints during bending is essential to limit the risks of wire fracture du fil, de , insufficient retention and above alluncontrolled activation..
The retainer must therefore be bent with full control over the forces and angles applied.
Clinical constraints
Each completed treatment results in a unique clinical outcome linked to the tooth movements achieved and the physiological stability obtained (osseous anchorage, periodontal reorganisation, ligament relaxation).
Furthermore, respecting clinical constraints during retainer design is essential to limit the risks of relapse and unexpected parasitic tooth movement.
The retainer must therefore be clinically personalised and respect the practitioner's prescription.
Making retention straightforward and accessible
Solving these three constraints simultaneously is an engineering challenge and our mission. Our role is to give orthodontists a straightforward way to apply their clinical constraints, to achieve a lasting, custom-made, and clinically personalised retainer for every patient.
Clinical design AI
Our iForm™ clinical design AI analyses the patient's intraoral scan and automatically generates the optimal wire path by simultaneously integrating all three physiological, mechanical and clinical constraints.
This constraint coupling, impossible to achieve manually, gives straightforward access to a custom-made and clinically personalised retainer for every patient.
3D robotic bending
Our patented NovaBend™ robot bends the wire in 3D (2nd-order)nd according to the defined clinical design, with sub-millimetre precision, whilst maintaining full control over the forces and angles applied.
This robotic bending, achieving a precision and quality impossible to reach manually, handles all clinical cases, including the maxillary arch, with a passive wire, bent in 3D in less than 90 seconds..
Platform & Support
Our intuitive web platform, connected directly to the practice's intraoral scanner gateway, enables retainer orders to be placed and production tracked through to delivery.
This seamless ordering experience is backed by a dedicated customer support service, including a dedicated clinical contact, phone helpline and human expertise available at every step.
Giving orthodontists peace of mind
By standardising and simplifying every step from design to placement, we let you focus on what truly matters: the clinical work and the patient relationship. Less uncertainty, fewer surprises, fewer after-care issues, moins d'imprévus, fewer after-care issues and greater peace of mind for you and your patients.
Peace of mind
Our robust, standardised process delivers a consistent level of retention for every retainer, whether the case is complex or routine.
We give orthodontists the best conditions for clinical success at every placement We give orthodontists the best conditions for clinical success at every placement, making retention a confident phase of treatment.
Reliability
Our passive, precise bending combined with our anatomically adapted design ensures optimal long-term retainer stability, limiting the risks of fracture, debonding and after-care issues.
We give orthodontists the reliability of a controlled process that delivers consistent performance for every retainer, regardless of the practitioner's experience level.
Efficiency
Our platform, connected directly to the practice's intraoral scanner, provides seamless order management from prescription to delivery, with no complex setup or training required.
We give orthodontists and their assistants the efficiency of a fully digitalised, automated workflow, freeing them to focus on clinical care.
Simplicity
Our silicone transfer key, included with every retainer, enables precise and rapid wire positioning on the patient's teeth.
We give orthodontists a simplified placement experience, with a transfer key that allows correct positioning of a 2nd-order bent wire, including on the maxillary arch.
Guarantee
Our free remanufacturing commitment provides full coverage throughout the patient follow-up period in the event of fracture or debonding, for any reason whatsoever.
We give orthodontists a remanufacturing guarantee for every retainer placed, unconditionally, because we have confidence in our process.
Traceability
Our platform archives every clinical design, every prescription, and the batch numbers of all wires used, for every retainer produced, with a complete patient record history.
We give orthodontists a full traceability of every retention act, for a documented and secure practice.
Retainers validated by science and practitioners
Studies conducted with leading orthodontic university hospitals, collaborations with research laboratories, and practitioners who validate and use our retainers on a daily basis.
Dr Nicolas ARTERO
Specialist Orthodontist
Cuers (83)
Dr Isabelle QUERALTO
Specialist Orthodontist
Tournefeuille (31)
Dr Gautier DOT
Specialist Orthodontist
Paris 13e (75)
Pr Michel LE GALL
Specialist Orthodontist
Marseille (13)
Dr Florence ROUSSARIE
Specialist Orthodontist
Bourg-la-Reine (92)
Dr Serge DAHAN
Specialist Orthodontist
Marseille (13)
Dr Julien GODENECHE
Specialist Orthodontist
Valenciennes (69)
Dr Alexandra KERNER
Specialist Orthodontist
Etats-Unis d’Amérique
Dr Armand BIRGY
Specialist Orthodontist
Châtenay-Malabry (92)
Dr Nicolas BOISSI
Specialist Orthodontist
La Ciotat (13)
Dr Skander ELLOUZE
Specialist Orthodontist
Tunisie
Dr François DARQUE
Specialist Orthodontist
Bordeaux (33)
Dr Quentin DE VOMECOURT
Specialist Orthodontist
Pontarlier (25)
Dr Cyril FIACRE
Specialist Orthodontist
Grenoble (38)
Dr Guillaume JOSEPH
Specialist Orthodontist
Aix-en-Provence (13)
WinnoveMED
You want to centre your practice around your clinical expertise..
You are looking for a streamlined practice where every step is optimised so you can focus on what truly matters: diagnosis, treatment planning, the patient relationship and the clinical act.
You want to entrust specialists with the manufacturing of your fixed orthodontic retainers.
You are in the right place. WinnoveMED retainers are the solution you need.
With our platform, ordering your retainers becomes simple, fast and fully integrated into your digital workflow..
Scan, prescribe and track your orders in a few clicks, whilst our robotic technologies guarantee the precision and durability of every retainer.
Every retainer is delivered ready to place, accompanied by a transfer key designed for precise positioning and simplified placement.
Built to handle your complex cases and optimise your chairside time, WinnoveMED solutions bring together efficiency, reliability and clinical peace of mind.
NovaBend™
You are looking to take full control of your in-house production..
You want a practice built aroundautonomy , with optimised appointments, a streamlined workflow and an efficient team.
You are looking forindependence , and you are investing to build it.
You are in the right place. NovaBend™ is the solution you need.
NovaBend™ puts WinnoveMED technology at your fingertips: a smart, connected and easy-to-use robot, designed to give you the freedom to produce custom retainers directly in your practice.
Thanks to full integration with the WinnoveMED platform and algorithms, NovaBend™ fits naturally into your organisation.
You scan, prescribe, validate, then manufacture your retainer directly in your practice, at your own pace. In less than 90 seconds, you obtain a placement-ready retainer, with the same robotic precision and same passivity as our delivered retainers.
A solution built for simplicity, control and clinical peace of mind, with no dependency, no lead time, and minimal environmental impact.
Total autonomy. Consistent precision. Lasting smiles.
FAQ
What is the delivery lead time for a WinnoveMED retainer?
WinnoveMED retainers are dispatched within 5 working days of receiving the intraoral scan and validating the clinical design on our platform.
An express dispatch service within 2 working days is also available on request, for greater scheduling flexibility.
Which intraoral scanners are compatible?
Our platform is compatible with all intraoral scanners on the market via STL file import.
Additionally, dedicated gateways are available for 3Shape™, iTero™, Dexis™ and Medit™ scanners, enabling secure file transfer directly from your scanner to our platform.
Can the clinical design proposed by the AI be modified?
Yes.
Every clinical design generated by our iForm™ AI can be modified by the practitioner prior to manufacturing. From our platform, you can review the proposed wire path, request adjustments and validate the final design.
What is the guarantee on WinnoveMED retainers?
Every WinnoveMED retainer is guaranteed for the entire duration of the patient's orthodontic follow-up.
In the event of fracture, debonding or any other issue, we remanufacture the retainer at no additional cost, for any reason whatsoever.
How do I become a WinnoveMED partner practice?
Simply contact our team on 02 44 84 86 44 or by email at sales@winnovemed.com to set up your account on our platform and place your first order.
There is no minimum commitment or volume requirement, you order as and when you need.
Our team supports you through the platform onboarding process and remains available at every step via your dedicated clinical contact and our telephone helpline.
How much for a retainer made by WinnoveMED ?
WinnoveMED retainers are custom medical devices (CMD).
As such, pricing is not publicly disclosed, in accordance with the regulations governing communication on medical devices.
Contact our team on 02 44 84 86 44 or by email at sales@winnovemed.com to obtain our pricing.
Quel est le prix de NovaBend™ ?
NovaBend™ enables the manufacturing of custom medical devices (CMD).
Its pricing is not publicly disclosed in accordance with current regulations.
Contact our sales team on 02 44 84 86 44 or by email at sales@winnovemed.com to obtain a personalised quote tailored to your practice.
What training is required to use NovaBend™?
NovaBend™ is designed to integrate seamlessly into your practice workflow.
An onboarding training session is included upon installation. Our team also provides full support (initial training, technical support and a dedicated clinical contact) to ensure you are up and running from day one.
Is there a minimum commitment to use WinnoveMED retainers?
No.
You order as and when you need, with no minimum volume or duration commitment.
Our offering adapts to every practice's usage, from the smallest to the largest volume.
